Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Cut and Install Risers (Optional but Recommended)

Measure the exact height between each tread (riser height). Cut boards (often 1x lumber) to this height and the width of the stairs. Risers can be installed flush with the front of the tread or set back slightly. Secure them by screwing through the riser into the back of the tread above and into the stringer on the sides. While not always required by code, closed risers prevent items from falling through the stairs and offer a more finished look.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Cut and Install Risers (Optional but Recommended)

Measure the exact height between each tread (riser height). Cut boards (often 1x lumber) to this height and the width of the stairs. Risers can be installed flush with the front of the tread or set back slightly. Secure them by screwing through the riser into the back of the tread above and into the stringer on the sides. While not always required by code, closed risers prevent items from falling through the stairs and offer a more finished look.

Videos for this step

Install Stair RisersInstall RisersInstall Treads and Risers

Tools and Materials

← Project

How to Build Basement Stairs

Step 7 of 9·9 hr left

Measure and Plan Stair Location
90 minutes6 items
Cut Stair Stringers
120 minutes6 items
Install Top Support for Stringers
60 minutes5 items
Attach Stringers to Top Support
45 minutes4 items
Secure Bottom of Stringers
60 minutes5 items
Cut and Install Treads
180 minutes7 items
7
Cut and Install Risers (Optional but Recommended)
120 minutes6 items
8
Install Handrails and Balusters
180 minutes7 items
9
Sand and Finish Treads and Risers
240 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.