Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Attach Stringers to Top Support

Carefully lift and position the cut stringers against the ledger board. Ensure the top cut of each stringer sits flush and is properly supported by the ledger. Use strong metal hangers (stringer hangers or joist hangers) designed for this purpose, or toenail the stringers by driving screws at an angle through the stringer into the ledger board. Ensure the stringers are parallel and the correct distance apart.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Attach Stringers to Top Support

Carefully lift and position the cut stringers against the ledger board. Ensure the top cut of each stringer sits flush and is properly supported by the ledger. Use strong metal hangers (stringer hangers or joist hangers) designed for this purpose, or toenail the stringers by driving screws at an angle through the stringer into the ledger board. Ensure the stringers are parallel and the correct distance apart.

Videos for this step

Install Stringers and BracketsInstall StringersInstalling Stringer Hangers to Deck

Tools and Materials

← Project

How to Build Basement Stairs

Step 4 of 9·13.8 hr left

Measure and Plan Stair Location
90 minutes6 items
Cut Stair Stringers
120 minutes6 items
Install Top Support for Stringers
60 minutes5 items
4
Attach Stringers to Top Support
45 minutes4 items
5
Secure Bottom of Stringers
60 minutes5 items
6
Cut and Install Treads
180 minutes7 items
7
Cut and Install Risers (Optional but Recommended)
120 minutes6 items
8
Install Handrails and Balusters
180 minutes7 items
9
Sand and Finish Treads and Risers
240 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.