Step 6 · Cut and Install Treads
Measure the depth of each step opening (the run) and the width of the stairs. Cut your tread material to these dimensions. The treads should typically overhang the riser by about 1 inch. Common tread materials include 2x lumber (like pine or oak), plywood, or specially made stair treads. Treads are usually attached by screwing through the stringer into the underside of the tread, or by using specialized tread brackets. For a cleaner look, you can notch the stringers to accept the treads, but ensure this does not compromise the stringer's strength. Ensure treads are level and securely fastened.