Skip to main content

Install Risers — Cut and Install Risers (Optional but Recommended)

Intermediate5 mins

Part of project

How to Build Basement Stairs · Step 7 of 9

Helpful?

In this video

Install the risers (2x8s) into the pre-cut stair stringers. Use a hammer to tap the risers firmly into place, ensuring a snug fit against the stringer. The bottom of the risers should be cut 1/8 inch shorter to allow for potential subfloor variations and prevent squeaking. Use a cordless drill with structural screws to secure the risers to the stringers. Apply leg pressure to hold the riser in place while driving the screw. Even if a screw misses, it can be removed and redriven without compromising the overall structure, demonstrating the flexibility of structural screws over nails.

52.4K views1.3K
Transcript
Hide

okay we're on the home stretch let's get these things in so you can already see that we're spaced off of the wall what i like to do is check the bottom right on the money see remember that bottom cut i went ahead and cut it an eighth of an inch it's just the way things always work out it's easier to do that and if i need to glue shims i could but i don't think i've ever actually had to do that so because we have a two by stringer and then a two by spacer board then i need to fasten it with these screws structural screws so that's what i'm gonna do so i'm going to get it started i'm going to put pressure against it with my leg and i'm going to watch yeah i need to come up just a hair i want to be right on that blue line right on the money so i like to use these screws because it clamps so well that there's never going to be movement on the stringer yeah and even though i don't probably don't need to put one there i'm gonna do it because if you were to get a squeak here later you have to get under this it's not a not a fun thing yeah see that guy missed that's the beauty of screws right if i something goes a little wonky it's not the end of the world okay so that should have been number one and this is number four remember that from cutting the stringers that way even if there's some discrepancies they're just going to plane out we're not building furniture nice and strong i'm going to go ahead and do that to both of these down at the bottom yeah started nice and straight make sure it's on the floor boom and just for giggles i'll do the bottom

Auto-generated transcript. May contain errors.