Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 8 · Sand and Clean

After the wood filler has dried, lightly sand any high spots or rough areas using a fine-grit sandpaper or sanding sponge. The goal is to create a smooth transition between the filler/caulk and the molding. Once sanded, wipe down the entire length of the crown molding and the adjacent walls and ceiling with a tack cloth or a slightly damp cloth to remove all dust and debris.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Sand and Clean

After the wood filler has dried, lightly sand any high spots or rough areas using a fine-grit sandpaper or sanding sponge. The goal is to create a smooth transition between the filler/caulk and the molding. Once sanded, wipe down the entire length of the crown molding and the adjacent walls and ceiling with a tack cloth or a slightly damp cloth to remove all dust and debris.

← Project

Crown Molding Installation

Step 8 of 9·1 min left

Measure and Mark
0 mins
Set Up Miter Saw for Angled Cuts
0 mins
Cut Crown Molding Pieces
0 mins
Dry Fit Molding Sections
0 mins
Apply Adhesive
0 mins
Fasten Molding with Nails
0 mins
Fill Nail Holes and Gaps
0 mins
8
Sand and Clean
0 mins
9
Paint or Finish Molding
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.