Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 7 · Fill Nail Holes and Gaps

Once the adhesive has cured, use a paintable wood filler to fill all visible nail holes. For small gaps between the molding and the wall/ceiling, or at mitered joints, use a paintable caulk. Apply the filler or caulk generously into the holes and gaps, then smooth it flush with a putty knife or your finger. Allow the filler to dry completely before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Fill Nail Holes and Gaps

Once the adhesive has cured, use a paintable wood filler to fill all visible nail holes. For small gaps between the molding and the wall/ceiling, or at mitered joints, use a paintable caulk. Apply the filler or caulk generously into the holes and gaps, then smooth it flush with a putty knife or your finger. Allow the filler to dry completely before proceeding.

← Project

Crown Molding Installation

Step 7 of 9·1 min left

Measure and Mark
0 mins
Set Up Miter Saw for Angled Cuts
0 mins
Cut Crown Molding Pieces
0 mins
Dry Fit Molding Sections
0 mins
Apply Adhesive
0 mins
Fasten Molding with Nails
0 mins
7
Fill Nail Holes and Gaps
0 mins
8
Sand and Clean
0 mins
9
Paint or Finish Molding
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.