Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Final Inspection and Trim Excess Cable

Walk the length of the cable railing system, visually inspecting each cable, fitting, and tensioning device for proper installation, alignment, and security. Ensure there are no frayed ends or sharp protrusions. Once satisfied with the tension and security, use a cable cutter to trim any excess cable extending beyond the tensioning fitting at the starting post. Leave a small amount of cable, typically 1/2 to 1 inch, beyond the fitting for aesthetic reasons or future adjustments.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Final Inspection and Trim Excess Cable

Walk the length of the cable railing system, visually inspecting each cable, fitting, and tensioning device for proper installation, alignment, and security. Ensure there are no frayed ends or sharp protrusions. Once satisfied with the tension and security, use a cable cutter to trim any excess cable extending beyond the tensioning fitting at the starting post. Leave a small amount of cable, typically 1/2 to 1 inch, beyond the fitting for aesthetic reasons or future adjustments.

Videos for this step

Trim Excess Cable & Install End CapsFinal Inspection and CompletionFinal Cable Tensioning

Tools and Materials

← Project

How to Tension and Adjust Stair Cable Railing

Step 8 of 8·15 min left

Initial Cable Engagement
30 minutes3 items
Attach Tensioning Fitting to First Cable End
20 minutes3 items
Install Tensioning Device at Opposite End
25 minutes3 items
Initial Cable Tensioning
15 minutes2 items
Check for Sag and Vibration
10 minutes1 items
Fine-Tuning Tension
20 minutes2 items
Secure Tensioning Device
10 minutes3 items
8
Final Inspection and Trim Excess Cable
15 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.