Skip to main content

Trim Excess Cable & Install End Caps — Final Inspection and Trim Excess Cable

Beginner4 hours

Part of project

How to Tension and Adjust Stair Cable Railing · Step 8 of 8

Helpful?

In this video

Once all cables are properly tensioned and you have verified their uniformity and tautness, use heavy-duty pliers or specialized cable snips to trim any excess cable wire that extends past the tensioning fittings. The cut should be clean and flush with the fitting or trimmed to a specified length as per the manufacturer's instructions. After trimming, press or screw on the decorative end caps, often referred to as 'buttons', over the exposed tensioning hardware. These caps not only conceal the hardware for a cleaner aesthetic but also provide a smooth, polished, and safe finish to the completed cable railing.

10.3K views308
Transcript
Hide

down tighten them up be good to go now that we have them all tensioned we can cut off the slack you can see the extra run of cable you want a nice heavy duty set of snippers here i don't know what you call these wire cutters i don't know they're just heavy duty pliers finish it off with our little button boom toss it

Auto-generated transcript. May contain errors.