Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Attach Tensioning Fitting to First Cable End

At the starting post, take the slackened end of the cable and attach a tensioning fitting. If using a swage fitting, position it onto the cable and use a swaging tool to permanently crimp it in place. If using a threaded terminal, follow the manufacturer's instructions for securing it, which may involve a specific crimping method or adhesive. Ensure the fitting is firmly attached and aligned correctly with the cable's direction.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Attach Tensioning Fitting to First Cable End

At the starting post, take the slackened end of the cable and attach a tensioning fitting. If using a swage fitting, position it onto the cable and use a swaging tool to permanently crimp it in place. If using a threaded terminal, follow the manufacturer's instructions for securing it, which may involve a specific crimping method or adhesive. Ensure the fitting is firmly attached and aligned correctly with the cable's direction.

Videos for this step

Swage Cable onto FittingsThread and Terminate Tensioning Cable EndsSecure and Tension Cables

Tools and Materials

← Project

How to Tension and Adjust Stair Cable Railing

Step 2 of 8·1.9 hr left

Initial Cable Engagement
30 minutes3 items
2
Attach Tensioning Fitting to First Cable End
20 minutes3 items
3
Install Tensioning Device at Opposite End
25 minutes3 items
4
Initial Cable Tensioning
15 minutes2 items
5
Check for Sag and Vibration
10 minutes1 items
6
Fine-Tuning Tension
20 minutes2 items
7
Secure Tensioning Device
10 minutes3 items
8
Final Inspection and Trim Excess Cable
15 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.