Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Initial Cable Tensioning

Using the installed tensioning device (turnbuckle or nuts on the threaded rod), begin to apply tension to the cable. Gradually tighten the device, observing the cable's tautness. The goal is to remove significant slack, making the cable firm to the touch without causing excessive deflection or stress on the posts. Aim for a slight give when pressed, indicating adequate tension without over-tightening.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Initial Cable Tensioning

Using the installed tensioning device (turnbuckle or nuts on the threaded rod), begin to apply tension to the cable. Gradually tighten the device, observing the cable's tautness. The goal is to remove significant slack, making the cable firm to the touch without causing excessive deflection or stress on the posts. Aim for a slight give when pressed, indicating adequate tension without over-tightening.

Videos for this step

Tension CablesHand-Tighten and Seat CablesTension the Cables

Tools and Materials

← Project

How to Tension and Adjust Stair Cable Railing

Step 4 of 8·1.2 hr left

Initial Cable Engagement
30 minutes3 items
Attach Tensioning Fitting to First Cable End
20 minutes3 items
Install Tensioning Device at Opposite End
25 minutes3 items
4
Initial Cable Tensioning
15 minutes2 items
5
Check for Sag and Vibration
10 minutes1 items
6
Fine-Tuning Tension
20 minutes2 items
7
Secure Tensioning Device
10 minutes3 items
8
Final Inspection and Trim Excess Cable
15 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.