Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 4 · Apply Adhesive

Generously apply a high-quality construction adhesive to the underside of each tread or to the top of the riser structure. Ensure even coverage, extending the adhesive to within about an inch of the edges. Use a caulking gun to apply the adhesive in a zig-zag pattern or as recommended by the adhesive manufacturer. Avoid over-application which can squeeze out excessively.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Apply Adhesive

Generously apply a high-quality construction adhesive to the underside of each tread or to the top of the riser structure. Ensure even coverage, extending the adhesive to within about an inch of the edges. Use a caulking gun to apply the adhesive in a zig-zag pattern or as recommended by the adhesive manufacturer. Avoid over-application which can squeeze out excessively.

Videos for this step

Apply Construction AdhesiveInstall First TreadInstall New Treads

← Project

Stair Tread Installation

Step 4 of 7·29 hr left

Prepare Riser Structure
90 minutes
Measure and Cut Treads
60 minutes
Dry Fit Treads
30 minutes
4
Apply Adhesive
45 minutes
5
Install Treads
75 minutes
6
Allow Adhesive to Cure
1440 minutes
7
Finish and Seal Treads
180 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.