Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 2 · Measure and Cut Treads

Measure the depth and width of each stair riser where a tread will be installed. Transfer these measurements to your chosen tread material. Use a circular saw or miter saw to cut the treads to size, ensuring straight and clean edges. For treads that will overhang the riser, account for this overhang in your measurements. Double-check all measurements before cutting.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Measure and Cut Treads

Measure the depth and width of each stair riser where a tread will be installed. Transfer these measurements to your chosen tread material. Use a circular saw or miter saw to cut the treads to size, ensuring straight and clean edges. For treads that will overhang the riser, account for this overhang in your measurements. Double-check all measurements before cutting.

Videos for this step

Measure and Cut TreadsMeasure and Cut New TreadsMeasure and Cut New Stair Treads

← Project

Stair Tread Installation

Step 2 of 7·30.5 hr left

Prepare Riser Structure
90 minutes
2
Measure and Cut Treads
60 minutes
3
Dry Fit Treads
30 minutes
4
Apply Adhesive
45 minutes
5
Install Treads
75 minutes
6
Allow Adhesive to Cure
1440 minutes
7
Finish and Seal Treads
180 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.