Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 8 · Sand and Smooth

After the filler has dried, sand all the new oak treads. Start with a medium-grit sandpaper (e.g., 120-grit) to remove any high spots or excess filler. Progress to a finer grit (e.g., 180 or 220-grit) to create a smooth finish. Feather the edges of any filled areas into the surrounding wood. Also, sand any rough spots on the risers or stringers that are visible. Wipe away all dust with a tack cloth.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Sand and Smooth

After the filler has dried, sand all the new oak treads. Start with a medium-grit sandpaper (e.g., 120-grit) to remove any high spots or excess filler. Progress to a finer grit (e.g., 180 or 220-grit) to create a smooth finish. Feather the edges of any filled areas into the surrounding wood. Also, sand any rough spots on the risers or stringers that are visible. Wipe away all dust with a tack cloth.

← Project

Oak Stair Tread Installation

Step 8 of 9·3.3 hr left

Remove Old Treads
30 minutes
Prepare the Stringers and Risers
60 minutes
Measure and Cut New Treads
90 minutes
Test Fit the New Treads
30 minutes
Apply Adhesive
20 minutes
Secure the New Treads
45 minutes
Fill Screw/Nail Holes
25 minutes
8
Sand and Smooth
75 minutes
9
Apply Finish
120 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.