Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 2 · Prepare the Stringers and Risers

After removing the old treads, thoroughly clean the stringers (the side supports of the stairs) and the risers (the vertical part between treads). Use a scraper or putty knife to remove any remnants of old glue, paint, or carpet padding. Inspect for any loose nails or staples and remove them. If there are any damaged areas, such as gouges or cracks, repair them with wood filler or epoxy as needed. Ensure the surfaces are smooth and free of obstructions.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 2 · Prepare the Stringers and Risers

After removing the old treads, thoroughly clean the stringers (the side supports of the stairs) and the risers (the vertical part between treads). Use a scraper or putty knife to remove any remnants of old glue, paint, or carpet padding. Inspect for any loose nails or staples and remove them. If there are any damaged areas, such as gouges or cracks, repair them with wood filler or epoxy as needed. Ensure the surfaces are smooth and free of obstructions.

← Project

Oak Stair Tread Installation

Step 2 of 9·7.8 hr left

Remove Old Treads
30 minutes
2
Prepare the Stringers and Risers
60 minutes
3
Measure and Cut New Treads
90 minutes
4
Test Fit the New Treads
30 minutes
5
Apply Adhesive
20 minutes
6
Secure the New Treads
45 minutes
7
Fill Screw/Nail Holes
25 minutes
8
Sand and Smooth
75 minutes
9
Apply Finish
120 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.