Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 4 · Test Fit the New Treads

Carefully set each cut tread onto its corresponding stringer. Check for any gaps, high spots, or areas where the tread doesn't sit flush. Ensure the nosing overhangs the riser correctly. Make any necessary adjustments by lightly sanding or trimming the edges. A snug fit is crucial for stability and appearance.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 4 · Test Fit the New Treads

Carefully set each cut tread onto its corresponding stringer. Check for any gaps, high spots, or areas where the tread doesn't sit flush. Ensure the nosing overhangs the riser correctly. Make any necessary adjustments by lightly sanding or trimming the edges. A snug fit is crucial for stability and appearance.

← Project

Oak Stair Tread Installation

Step 4 of 9·5.3 hr left

Remove Old Treads
30 minutes
Prepare the Stringers and Risers
60 minutes
Measure and Cut New Treads
90 minutes
4
Test Fit the New Treads
30 minutes
5
Apply Adhesive
20 minutes
6
Secure the New Treads
45 minutes
7
Fill Screw/Nail Holes
25 minutes
8
Sand and Smooth
75 minutes
9
Apply Finish
120 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.