Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings
Project video

Step 1 · Remove Old Treads

Begin by inspecting how the current treads are attached. If they are nailed, use a pry bar to gently lift the tread. For treads glued down, you may need to score the joint with a utility knife and then pry. In some cases, cutting the tread into sections might be necessary to remove it without damaging the stringers. Ensure you work safely, protecting yourself from flying debris.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Remove Old Treads

Begin by inspecting how the current treads are attached. If they are nailed, use a pry bar to gently lift the tread. For treads glued down, you may need to score the joint with a utility knife and then pry. In some cases, cutting the tread into sections might be necessary to remove it without damaging the stringers. Ensure you work safely, protecting yourself from flying debris.

← Project

Oak Stair Tread Installation

Step 1 of 9·8.3 hr left

1
Remove Old Treads
30 minutes
2
Prepare the Stringers and Risers
60 minutes
3
Measure and Cut New Treads
90 minutes
4
Test Fit the New Treads
30 minutes
5
Apply Adhesive
20 minutes
6
Secure the New Treads
45 minutes
7
Fill Screw/Nail Holes
25 minutes
8
Sand and Smooth
75 minutes
9
Apply Finish
120 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.