Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Leak Test

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Before closing up the wall, it is absolutely essential to test for leaks. Use a test plug or a tightly packed rag to block the drain from inside the tub. Fill the tub with 3-4 inches of water. From the access panel, use a flashlight to carefully inspect every joint you made: the drain shoe, the overflow gasket, and all cemented connections. Look for even the smallest drips. After 15 minutes, if there are no leaks, remove the plug and let the tub drain completely. As it drains, watch the connection at the P-trap to ensure it is also watertight. If you find a leak, you must drain the tub and fix the connection.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Leak Test

This is the step people usually slow down on. Go finger-tight first, then a quarter turn. No rush — replay the clip whenever it helps.

Before closing up the wall, it is absolutely essential to test for leaks. Use a test plug or a tightly packed rag to block the drain from inside the tub. Fill the tub with 3-4 inches of water. From the access panel, use a flashlight to carefully inspect every joint you made: the drain shoe, the overflow gasket, and all cemented connections. Look for even the smallest drips. After 15 minutes, if there are no leaks, remove the plug and let the tub drain completely. As it drains, watch the connection at the P-trap to ensure it is also watertight. If you find a leak, you must drain the tub and fix the connection.

Videos for this step

Reinstall Drain Flange and Test for LeaksFinal Test for LeaksCap and Test the System

Tools and Materials

← Project

How to Install a New Bathtub and Drain Assembly

Step 8 of 9·32 min left

Preparation and Old Tub Removal
3 mins7 items
Subfloor and Stud Inspection
2 mins8 itemsAdvanced
Pre-assemble the Drain and Overflow
1 min4 itemsAdvanced
Install Stringer Board
30 mins9 itemsIntermediate
Set the Bathtub in Place
1 min6 items
Secure Tub to Studs
30 mins2 itemsIntermediate
Connect Drain to Waste Line
1 min6 itemsAdvanced
8
Leak Test
30 mins4 itemsIntermediate
9
Install Faucet and Final Touches
2 mins7 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.