Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Pre-assemble the Drain and Overflow

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

It is vastly easier to assemble the drain and overflow components onto the new tub before it is placed in the alcove. Unbox the new tub and the new waste and overflow kit. Apply a rope of plumber's putty under the flange of the main drain fitting (the drain shoe) and insert it from inside the tub. From underneath, place the rubber gasket over the threads and screw on the drain tee. Tighten it securely using a tub drain wrench or pliers. Next, attach the overflow tube to the drain tee and to the overflow elbow. Fit the overflow gasket between the tub and the overflow plate and screw the plate on from inside the tub. Do not overtighten any connections.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Pre-assemble the Drain and Overflow

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

It is vastly easier to assemble the drain and overflow components onto the new tub before it is placed in the alcove. Unbox the new tub and the new waste and overflow kit. Apply a rope of plumber's putty under the flange of the main drain fitting (the drain shoe) and insert it from inside the tub. From underneath, place the rubber gasket over the threads and screw on the drain tee. Tighten it securely using a tub drain wrench or pliers. Next, attach the overflow tube to the drain tee and to the overflow elbow. Fit the overflow gasket between the tub and the overflow plate and screw the plate on from inside the tub. Do not overtighten any connections.

Videos for this step

Prepare the Overflow AssemblyAssemble and Tighten Overflow DrainInstall and Tighten Drain Assembly

Tools and Materials

← Project

How to Install a New Bathtub and Drain Assembly

Step 3 of 9·1.6 hr left

Preparation and Old Tub Removal
3 mins7 items
Subfloor and Stud Inspection
2 mins8 itemsAdvanced
3
Pre-assemble the Drain and Overflow
1 min4 itemsAdvanced
4
Install Stringer Board
30 mins9 itemsIntermediate
5
Set the Bathtub in Place
1 min6 items
6
Secure Tub to Studs
30 mins2 itemsIntermediate
7
Connect Drain to Waste Line
1 min6 itemsAdvanced
8
Leak Test
30 mins4 itemsIntermediate
9
Install Faucet and Final Touches
2 mins7 itemsAdvanced
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.