Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 8 · Install Joists

Cut the joists (e.g., 2x6s or 2x8s pressure-treated lumber) to length. Mark the joist layout on the beams and ledger board, typically spaced 16 inches on center. Attach the joists using joist hangers secured to the ledger board and beams. Ensure all joists are parallel and square to the ledger. Install blocking between joists as required by code for lateral stability.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Install Joists

Cut the joists (e.g., 2x6s or 2x8s pressure-treated lumber) to length. Mark the joist layout on the beams and ledger board, typically spaced 16 inches on center. Attach the joists using joist hangers secured to the ledger board and beams. Ensure all joists are parallel and square to the ledger. Install blocking between joists as required by code for lateral stability.

Videos for this step

Installing Floor Joists and BlockingInstall Floor Joists and BlockingInstall Joists and Joist Hangers

Tools and Materials

← Project

Deck Construction

Step 8 of 13·60 hr left

Obtain Permits and Understand Local Codes
600 minutes2 items
Design and Plan the Deck
480 minutes4 items
Layout and Excavate Footings
720 minutes6 items
Pour Concrete Footings
480 minutes8 items
Install Post Anchors and Posts
360 minutes7 items
Install Ledger Board (if applicable)
360 minutes8 items
Install Beams
300 minutes6 items
8
Install Joists
720 minutes8 items
9
Install Decking
960 minutes7 items
10
Build and Install Railings
720 minutes9 items
11
Build and Install Stairs (if applicable)
600 minutes8 items
12
Apply Finishing Touches
360 minutes5 items
13
Final Inspection and Cleanup
240 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.