Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Install Support Stakes

Drive additional timber stakes into the ground along the outside of the long sides of each step frame. These stakes should be driven deep enough to provide solid support and then fastened to the frame using screws. This adds crucial lateral stability, especially on a slope.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Install Support Stakes

Drive additional timber stakes into the ground along the outside of the long sides of each step frame. These stakes should be driven deep enough to provide solid support and then fastened to the frame using screws. This adds crucial lateral stability, especially on a slope.

Videos for this step

Anchor the Bottom Riser with StakesContinue Building Steps Up the HillsideSecure and Level Stairs with Stakes

Tools and Materials

← Project

How to Build Timber and Gravel Steps on a Slope

Step 5 of 8·7 hr left

Mark the Step Locations
60 minutes4 items
Excavate for Step Frames
180 minutes4 items
Cut Timber Frame Components
90 minutes4 items
Assemble and Position Step Frames
120 minutes5 items
5
Install Support Stakes
90 minutes3 items
6
Fill Frames with Gravel
180 minutes4 items
7
Add Decorative Top Layer (Optional)
60 minutes3 items
8
Backfill and Landscape Edges
90 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.