Apply Adhesive and Install Treads — Cut and Install Treads
Part of project
How to Build Basement Stairs · Step 6 of 9
In this video
Cut OSB or plywood to the correct dimensions for the stair treads. Apply a generous bead of construction adhesive along the top edges of all stringers and intermediate support blocks for each step. Carefully place each tread board onto the adhesive-covered surfaces, ensuring it is flush with the risers and properly aligned. Use a nail gun to temporarily secure the treads in place with nails. The nails hold the treads until the adhesive cures, providing a strong, squeak-free connection. Ensure the treads are perfectly flat and level before the adhesive sets.
Apply Adhesive and Install Treads — Cut and Install Treads
Part of project
How to Build Basement Stairs · Step 6 of 9
In this video
Cut OSB or plywood to the correct dimensions for the stair treads. Apply a generous bead of construction adhesive along the top edges of all stringers and intermediate support blocks for each step. Carefully place each tread board onto the adhesive-covered surfaces, ensuring it is flush with the risers and properly aligned. Use a nail gun to temporarily secure the treads in place with nails. The nails hold the treads until the adhesive cures, providing a strong, squeak-free connection. Ensure the treads are perfectly flat and level before the adhesive sets.