Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Identify and label wires

At the first switch location (e.g., top of stairs), identify the incoming hot wire (usually black), the wire going to the light (switched hot), and the traveler wires. At the second switch location (e.g., bottom of stairs), identify the wire coming from the first switch (traveler) and the wire going to the light (switched hot). At the light fixture, identify the hot wire from the switch, the neutral wire, and the ground wire. Use electrical tape or wire nuts to label each wire clearly (e.g., 'LINE', 'LOAD', 'TRAVELER 1', 'TRAVELER 2').

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Identify and label wires

At the first switch location (e.g., top of stairs), identify the incoming hot wire (usually black), the wire going to the light (switched hot), and the traveler wires. At the second switch location (e.g., bottom of stairs), identify the wire coming from the first switch (traveler) and the wire going to the light (switched hot). At the light fixture, identify the hot wire from the switch, the neutral wire, and the ground wire. Use electrical tape or wire nuts to label each wire clearly (e.g., 'LINE', 'LOAD', 'TRAVELER 1', 'TRAVELER 2').

Videos for this step

Label All WiresIdentify the Line (Hot) WireIdentify Wires and Switch Terminals

Tools and Materials

← Project

How to Wire a 3-way Switch for Stair Lights at the Top and Bottom

Step 3 of 7·1.8 hr left

De-energize the circuit
5 minutes2 items
Remove existing switch and light fixture
20 minutes2 items
3
Identify and label wires
30 minutes3 items
4
Install new 3-way switches
45 minutes3 items
5
Wire the light fixture
15 minutes2 items
6
Install switch and fixture covers
10 minutes3 items
7
Restore power and test operation
5 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.