Label All Wires — Identify and label wires
Part of project
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 3 of 7
In this video
Using the provided wire labels, carefully label each wire in both the main switch box (where the Line wire was found) and the satellite switch box. Label the energized wire as 'Line'. Label any white wires as 'Neutral'. Label any bare copper or green insulated wires as 'Ground'. The remaining wires are your 'Traveler' wires. There should be two traveler wires. Label one 'Traveler 1' and the other 'Traveler 2'. Ensure that the corresponding traveler wires (e.g., the red wire labeled 'Traveler 1' in the main box) are labeled the same in the satellite box. Identify the 'Load' wire in the satellite box, which typically connects to the light fixture itself. This might be the remaining traveler-like wire that is not connected to the main switch's Traveler 1 or Traveler 2.
Label All Wires — Identify and label wires
Part of project
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 3 of 7
In this video
Using the provided wire labels, carefully label each wire in both the main switch box (where the Line wire was found) and the satellite switch box. Label the energized wire as 'Line'. Label any white wires as 'Neutral'. Label any bare copper or green insulated wires as 'Ground'. The remaining wires are your 'Traveler' wires. There should be two traveler wires. Label one 'Traveler 1' and the other 'Traveler 2'. Ensure that the corresponding traveler wires (e.g., the red wire labeled 'Traveler 1' in the main box) are labeled the same in the satellite box. Identify the 'Load' wire in the satellite box, which typically connects to the light fixture itself. This might be the remaining traveler-like wire that is not connected to the main switch's Traveler 1 or Traveler 2.