Identify the Line (Hot) Wire — Identify and label wires
Part of project
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 3 of 7
In this video
With the circuit now live and wires insulated, use your non-contact voltage tester to identify the 'hot' wire. Carefully touch the tip of the tester to each capped wire end in the first switch box. Only one wire should cause the tester to light up and/or beep, indicating it is the line (hot) wire. Once identified, remove the WAGO connector from this wire and wrap its exposed end with red electrical tape for clear identification. Confirm that no other wires in this box, or any wires in the second switch box, are hot. In a correctly wired 3-way system, the line wire typically enters only one of the switch boxes or the light fixture itself.
Identify the Line (Hot) Wire — Identify and label wires
Part of project
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 3 of 7
In this video
With the circuit now live and wires insulated, use your non-contact voltage tester to identify the 'hot' wire. Carefully touch the tip of the tester to each capped wire end in the first switch box. Only one wire should cause the tester to light up and/or beep, indicating it is the line (hot) wire. Once identified, remove the WAGO connector from this wire and wrap its exposed end with red electrical tape for clear identification. Confirm that no other wires in this box, or any wires in the second switch box, are hot. In a correctly wired 3-way system, the line wire typically enters only one of the switch boxes or the light fixture itself.