Skip to main content

Identify Wires and Switch Terminals — Identify and label wires

Beginner4 hours

Part of project

How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 3 of 7

Helpful?

In this video

Before starting the wiring, it's crucial to understand the components. You will need '14-3 wire', which is characterized by having an extra red wire in addition to the black, white, and bare ground wires found in standard '14-2 wire'. This red wire will serve as one of the 'traveler' wires between the two switches. Each 3-way switch has three terminals for wires: a distinct dark-colored screw (often black) for the 'common' wire, and two lighter-colored screws (often brass) for the 'traveler' wires. The common terminal on the switch receiving power from the panel is where the incoming hot wire connects, and the common terminal on the switch connected to the light fixture is where the outgoing hot wire to the light connects. The two brass terminals on each switch are where the traveler wires connect, allowing power to 'travel' between the switches.

22.3K views635
Transcript
Hide

to do it. All right, so a few things before we even get started. First of all, you're going to need 14 three-wire. It has that extra red one. As where you see 14 two doesn't have the red. That red's going to act as your traveler, and that's super important. You need three-way switches. Here you have three terminals for your wire, one common, and two travelers, as opposed to just your normal switch. So, when it comes to wiring a three-way switch, this is the most important thing, your common. Your common's going to be what your power comes into from your panel, and your common is going to be what your power leaves out of to your light fixture. These two brass ones here are just your travelers. Power travels back and forth between the two of them. This supplies your power. This is where your power leaves. So, go

Auto-generated transcript. May contain errors.