Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Attach New Risers

Apply wood glue to the back of the riser and the edges where it meets the tread and stringers. Position the riser, ensuring it's flush with the tread above and the riser below. Secure it by driving nails or screws through the riser into the back of the tread and into the stringers. Use finishing nails for a cleaner look if desired.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Attach New Risers

Apply wood glue to the back of the riser and the edges where it meets the tread and stringers. Position the riser, ensuring it's flush with the tread above and the riser below. Secure it by driving nails or screws through the riser into the back of the tread and into the stringers. Use finishing nails for a cleaner look if desired.

Videos for this step

Install Risers and TreadsTread and Riser InstallationInstall Decorative MDF Risers

Tools and Materials

← Project

How to Update a Split-Level Entry Staircase

Step 6 of 10·16.8 hr left

Remove Existing Treads and Risers
120 minutes4 items
Inspect and Repair Stringers
60 minutes4 items
Cut and Fit New Treads
180 minutes5 items
Cut and Fit New Risers
120 minutes4 items
Attach New Treads
90 minutes4 items
6
Attach New Risers
75 minutes5 items
7
Install Newel Posts
150 minutes5 items
8
Install Balusters (Spindles)
240 minutes5 items
9
Install Handrail and Railing System
180 minutes6 items
10
Sand and Finish
360 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.