Skip to main content

Tread and Riser Installation — Attach New Risers

Intermediate7 mins

Part of project

How to Update a Split-Level Entry Staircase · Step 6 of 10

Helpful?

In this video

Place the treads into the prepared stringers. Even with a tight fit (2-3 mm narrower than the groove), getting each tread perfectly in place requires hammering about 20 times to achieve a snug fit. For the first riser, which is typically the most challenging to attach, install it from the back. Apply wood glue to the back of the riser and nail a thin piece of wood to the riser to attach it to the floor. To prevent future splitting around screw holes, apply a bead of glue along the edges of the riser and at the center of the grain. This also helps seal any potential cracks and reinforces the connection.

1.1M views23.2K