Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 5 · Attach New Treads

Apply wood glue to the top edge of the stringers where the tread will rest. Position the first tread and secure it by driving screws through the tread into the stringers. Use at least two screws per stringer. Countersink the screws so they can be covered later. Repeat for all treads.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 5 · Attach New Treads

Apply wood glue to the top edge of the stringers where the tread will rest. Position the first tread and secure it by driving screws through the tread into the stringers. Use at least two screws per stringer. Countersink the screws so they can be covered later. Repeat for all treads.

Videos for this step

Fasten New Treads with ScrewsInstall TreadsInstall New Treads

Tools and Materials

← Project

How to Update a Split-Level Entry Staircase

Step 5 of 10·18.3 hr left

Remove Existing Treads and Risers
120 minutes4 items
Inspect and Repair Stringers
60 minutes4 items
Cut and Fit New Treads
180 minutes5 items
Cut and Fit New Risers
120 minutes4 items
5
Attach New Treads
90 minutes4 items
6
Attach New Risers
75 minutes5 items
7
Install Newel Posts
150 minutes5 items
8
Install Balusters (Spindles)
240 minutes5 items
9
Install Handrail and Railing System
180 minutes6 items
10
Sand and Finish
360 minutes6 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.