Skip to main content

Install Risers and Treads — Attach New Risers

Intermediate7 mins

Part of project

How to Update a Split-Level Entry Staircase · Step 6 of 10

Helpful?

In this video

Starting from the top, apply construction adhesive to the face of the stringers where the next riser will be placed. Position the riser and secure it to the stringers with screws. Then, apply adhesive to the top edge of the installed riser and the exposed edges of the stringers where the tread will sit. Place the pre-made OSB stair tread (1 inch thick with a bullnose edge) onto the stringers and secure it with screws. Continue this process for all remaining risers and treads, moving down the staircase. For added stability, drive screws from the back of each riser into the corresponding tread. Ensure the overhang of each tread is consistent. The video demonstrates using 3-inch screws for the treads.

7.5K views539