Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 7 · Cut Stringers

Using a circular saw or handsaw, carefully cut along all the marked lines on the stringers. Make precise cuts for the tread notches and riser lines. Pay special attention to the angled cuts required for the winder sections to ensure they align perfectly with the winder tread layout. Ensure all cuts are clean and accurate for a tight fit.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Cut Stringers

Using a circular saw or handsaw, carefully cut along all the marked lines on the stringers. Make precise cuts for the tread notches and riser lines. Pay special attention to the angled cuts required for the winder sections to ensure they align perfectly with the winder tread layout. Ensure all cuts are clean and accurate for a tight fit.

Videos for this step

Cut the StringerCut StringersCut the Stringers

Tools and Materials

← Project

How to Lay Out Winder Stairs

Step 7 of 7·1 hr left

Determine Total Rise and Run
30 minutes2 items
Calculate Number of Treads and Risers
20 minutes2 items
Determine Tread Depth and Landing Dimensions
30 minutes2 items
Layout the Stair Angle and Width
45 minutes4 items
Determine Winder Tread Layout
120 minutes6 items
Mark Stringers for Winder Treads
90 minutes5 items
7
Cut Stringers
60 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.