Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Mark Stringers for Winder Treads

Using the previously determined rise and run measurements, and the winder tread layout, meticulously mark the cut lines on the stair stringers. This involves marking the 'rise' line and the 'run' line for each step. For winder steps, the 'run' line will be angled, and the marking must accurately reflect the point where the winder tread will seat. Ensure the layout accounts for the thickness of the treads and any trim or nosing.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Mark Stringers for Winder Treads

Using the previously determined rise and run measurements, and the winder tread layout, meticulously mark the cut lines on the stair stringers. This involves marking the 'rise' line and the 'run' line for each step. For winder steps, the 'run' line will be angled, and the marking must accurately reflect the point where the winder tread will seat. Ensure the layout accounts for the thickness of the treads and any trim or nosing.

Videos for this step

Marking StringersMark First Step CutsImplement the Nosing Offset Adjustment

Tools and Materials

← Project

How to Lay Out Winder Stairs

Step 6 of 7·2.5 hr left

Determine Total Rise and Run
30 minutes2 items
Calculate Number of Treads and Risers
20 minutes2 items
Determine Tread Depth and Landing Dimensions
30 minutes2 items
Layout the Stair Angle and Width
45 minutes4 items
Determine Winder Tread Layout
120 minutes6 items
6
Mark Stringers for Winder Treads
90 minutes5 items
7
Cut Stringers
60 minutes3 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.