Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 9 · Install New Tile

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

After the waterproofing membrane has fully cured (check manufacturer's instructions), mix a small batch of thin-set mortar to a peanut butter-like consistency. Apply the mortar to the backer board patch using the flat side of a notched trowel, then comb it with the notched side to create even ridges. Firmly press your replacement tile(s) into the mortar with a slight twisting motion. Use tile spacers to maintain consistent grout lines that match the rest of the wall. Allow the mortar to cure for at least 24 hours before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 9 · Install New Tile

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

After the waterproofing membrane has fully cured (check manufacturer's instructions), mix a small batch of thin-set mortar to a peanut butter-like consistency. Apply the mortar to the backer board patch using the flat side of a notched trowel, then comb it with the notched side to create even ridges. Firmly press your replacement tile(s) into the mortar with a slight twisting motion. Use tile spacers to maintain consistent grout lines that match the rest of the wall. Allow the mortar to cure for at least 24 hours before proceeding.

Videos for this step

Bed and Clean the TilesInstall Waterproofing MembraneInstall and Overlap Wall Membrane

Tools and Materials

← Project

How to Replace a Shower Valve Through a Tiled Wall

Step 9 of 11·1.3 hr left

Preparation and Water Shut-off
20 mins2 itemsBeginner
Remove Old Trim
15 mins4 itemsBeginner
Create Tile Access Opening
60 mins9 items
Remove Old Shower Valve
45 mins4 itemsAdvanced
Prepare and Dry-Fit New Valve
45 mins9 itemsAdvanced
Solder New Valve
60 mins9 items
Leak Test
20 mins9 itemsIntermediate
Repair the Wall
40 mins7 itemsAdvanced
9
Install New Tile
30 mins6 items
10
Grout and Seal
30 mins10 itemsAdvanced
11
Install New Trim and Final Test
20 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.