Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Solder New Valve

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the plastic cartridge from the new valve body to protect it from heat damage. Place a flame shield behind the work area to protect the wood studs. Apply a thin, even layer of flux to the cleaned ends of the pipes and the inside of the fittings. Assemble the joints. Using a propane torch, heat the fitting (not the pipe) evenly. Touch the lead-free solder to the joint on the side opposite the flame. When the joint is hot enough, the solder will be drawn into the gap, creating a seal. Repeat for all connections. Allow the joints to cool completely without being disturbed.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Solder New Valve

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the plastic cartridge from the new valve body to protect it from heat damage. Place a flame shield behind the work area to protect the wood studs. Apply a thin, even layer of flux to the cleaned ends of the pipes and the inside of the fittings. Assemble the joints. Using a propane torch, heat the fitting (not the pipe) evenly. Touch the lead-free solder to the joint on the side opposite the flame. When the joint is hot enough, the solder will be drawn into the gap, creating a seal. Repeat for all connections. Allow the joints to cool completely without being disturbed.

Videos for this step

Solder the Valve AssemblySolder Pipe ConnectionsSolder the Joints

Tools and Materials

← Project

How to Replace a Shower Valve Through a Tiled Wall

Step 6 of 11·3.3 hr left

Preparation and Water Shut-off
20 mins2 itemsBeginner
Remove Old Trim
15 mins4 itemsBeginner
Create Tile Access Opening
60 mins9 items
Remove Old Shower Valve
45 mins4 itemsAdvanced
Prepare and Dry-Fit New Valve
45 mins9 itemsAdvanced
6
Solder New Valve
60 mins9 items
7
Leak Test
20 mins9 itemsIntermediate
8
Repair the Wall
40 mins7 itemsAdvanced
9
Install New Tile
30 mins6 items
10
Grout and Seal
30 mins10 itemsAdvanced
11
Install New Trim and Final Test
20 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.