Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · Grout and Seal

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the tile spacers. Mix your grout according to the package directions. Apply the grout diagonally across the tile joints using a grout float, pressing it firmly into the gaps. After about 15-30 minutes, use a damp grout sponge to wipe the excess grout off the tile surface. Let the grout cure for the manufacturer-recommended time (typically 24-72 hours). Once cured, apply a grout sealer to the new grout lines to protect them from moisture and staining. Finally, apply a bead of 100% silicone caulk around the perimeter of the new escutcheon plate where it will meet the tile.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Grout and Seal

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

Remove the tile spacers. Mix your grout according to the package directions. Apply the grout diagonally across the tile joints using a grout float, pressing it firmly into the gaps. After about 15-30 minutes, use a damp grout sponge to wipe the excess grout off the tile surface. Let the grout cure for the manufacturer-recommended time (typically 24-72 hours). Once cured, apply a grout sealer to the new grout lines to protect them from moisture and staining. Finally, apply a bead of 100% silicone caulk around the perimeter of the new escutcheon plate where it will meet the tile.

Videos for this step

Install Faucet Trim KitBed and Clean the TilesCure and Final Preparation

Tools and Materials

← Project

How to Replace a Shower Valve Through a Tiled Wall

Step 10 of 11·50 min left

Preparation and Water Shut-off
20 mins2 itemsBeginner
Remove Old Trim
15 mins4 itemsBeginner
Create Tile Access Opening
60 mins9 items
Remove Old Shower Valve
45 mins4 itemsAdvanced
Prepare and Dry-Fit New Valve
45 mins9 itemsAdvanced
Solder New Valve
60 mins9 items
Leak Test
20 mins9 itemsIntermediate
Repair the Wall
40 mins7 itemsAdvanced
Install New Tile
30 mins6 items
10
Grout and Seal
30 mins10 itemsAdvanced
11
Install New Trim and Final Test
20 mins3 itemsIntermediate
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.