Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 6 · Apply the Epoxy Coating

Start by pouring a manageable amount of the mixed epoxy onto the floor, often along one edge of the work area. Use a squeegee to spread the epoxy evenly across the surface. Immediately follow with a high-quality, solvent-resistant roller to back-roll the epoxy, ensuring a consistent thickness and eliminating squeegee marks. Work in sections, maintaining a wet edge to avoid lap lines. If using decorative flakes, broadcast them into the wet epoxy immediately after rolling, as per the kit's instructions.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Apply the Epoxy Coating

Start by pouring a manageable amount of the mixed epoxy onto the floor, often along one edge of the work area. Use a squeegee to spread the epoxy evenly across the surface. Immediately follow with a high-quality, solvent-resistant roller to back-roll the epoxy, ensuring a consistent thickness and eliminating squeegee marks. Work in sections, maintaining a wet edge to avoid lap lines. If using decorative flakes, broadcast them into the wet epoxy immediately after rolling, as per the kit's instructions.

Videos for this step

Spread and Roll Out EpoxyApply 100% Solids Epoxy Color CoatApply Epoxy Base Coat

Tools and Materials

← Project

Epoxy Floor Coating

Step 6 of 8·8.8 hr left

Clean the Concrete Floor
180 minutes8 items
Etch the Concrete Surface
120 minutes10 items
Repair Cracks and Pits
60 minutes4 items
Prime the Concrete (if recommended)
90 minutes5 items
Mix the Epoxy Coating
20 minutes5 items
6
Apply the Epoxy Coating
240 minutes6 items
7
Apply Topcoat (if applicable)
120 minutes5 items
8
Cure the Epoxy
168 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.