Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Clean the Concrete Floor

Begin by sweeping or vacuuming the entire concrete surface to remove loose debris. For any stubborn grease or oil stains, apply a concrete degreaser according to the product's instructions, scrub with a stiff-bristled brush, and rinse thoroughly. If the concrete has old paint or sealers, these may need to be mechanically removed in a later step. Ensure the floor is completely dry before proceeding.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Clean the Concrete Floor

Begin by sweeping or vacuuming the entire concrete surface to remove loose debris. For any stubborn grease or oil stains, apply a concrete degreaser according to the product's instructions, scrub with a stiff-bristled brush, and rinse thoroughly. If the concrete has old paint or sealers, these may need to be mechanically removed in a later step. Ensure the floor is completely dry before proceeding.

Videos for this step

Clean and Degrease Concrete SurfaceRemove Debris and Degrease FloorClean the Concrete Floor

Tools and Materials

← Project

Epoxy Floor Coating

Step 1 of 8·16.6 hr left

1
Clean the Concrete Floor
180 minutes8 items
2
Etch the Concrete Surface
120 minutes10 items
3
Repair Cracks and Pits
60 minutes4 items
4
Prime the Concrete (if recommended)
90 minutes5 items
5
Mix the Epoxy Coating
20 minutes5 items
6
Apply the Epoxy Coating
240 minutes6 items
7
Apply Topcoat (if applicable)
120 minutes5 items
8
Cure the Epoxy
168 minutes
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.