Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 3 · Remove faucet mounting nuts

Access the area under the sink where the faucet is installed. Locate the nuts that hold the faucet in place. Use a basin wrench or adjustable wrench to loosen and remove these nuts. There may be several nuts, depending on the faucet design.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Remove faucet mounting nuts

Access the area under the sink where the faucet is installed. Locate the nuts that hold the faucet in place. Use a basin wrench or adjustable wrench to loosen and remove these nuts. There may be several nuts, depending on the faucet design.

Videos for this step

Video 1Video 2Video 3

← Project

Kitchen Faucet Replacement

Step 3 of 13·3.4 hr left

Turn off water supply
0 mins
Disconnect water supply lines
0 mins
3
Remove faucet mounting nuts
0 mins
4
Remove old faucet
0 mins
5
Clean sink surface
0 mins
6
Prepare new faucet
0 mins
7
Apply plumber's putty or silicone sealant
0 mins
8
Install new faucet
0 mins
9
Tighten faucet mounting nuts
0 mins
10
Connect new water supply lines
0 mins
11
Turn water supply back on
0 mins
12
Test faucet operation
0 mins
13
Clean up excess sealant
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.