Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 12 · Test faucet operation

Turn on the new faucet handles to test both hot and cold water flow. Check that the sprayer (if applicable) functions correctly and that there are no leaks from the faucet body or spout. Ensure the water pressure is satisfactory.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 12 · Test faucet operation

Turn on the new faucet handles to test both hot and cold water flow. Check that the sprayer (if applicable) functions correctly and that there are no leaks from the faucet body or spout. Ensure the water pressure is satisfactory.

Videos for this step

Video 1Video 2Video 3

← Project

Kitchen Faucet Replacement

Step 12 of 13·37 min left

Turn off water supply
0 mins
Disconnect water supply lines
0 mins
Remove faucet mounting nuts
0 mins
Remove old faucet
0 mins
Clean sink surface
0 mins
Prepare new faucet
0 mins
Apply plumber's putty or silicone sealant
0 mins
Install new faucet
0 mins
Tighten faucet mounting nuts
0 mins
Connect new water supply lines
0 mins
Turn water supply back on
0 mins
12
Test faucet operation
0 mins
13
Clean up excess sealant
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.