Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Turn off water supply

Locate the hot and cold water supply lines connected to the existing faucet. Under the sink, you should find two shut-off valves. Turn these valves clockwise until they are fully closed. This will stop the flow of water to the faucet.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Turn off water supply

Locate the hot and cold water supply lines connected to the existing faucet. Under the sink, you should find two shut-off valves. Turn these valves clockwise until they are fully closed. This will stop the flow of water to the faucet.

Videos for this step

Video 1Video 2Video 3

← Project

Kitchen Faucet Replacement

Step 1 of 13·4 hr left

1
Turn off water supply
0 mins
2
Disconnect water supply lines
0 mins
3
Remove faucet mounting nuts
0 mins
4
Remove old faucet
0 mins
5
Clean sink surface
0 mins
6
Prepare new faucet
0 mins
7
Apply plumber's putty or silicone sealant
0 mins
8
Install new faucet
0 mins
9
Tighten faucet mounting nuts
0 mins
10
Connect new water supply lines
0 mins
11
Turn water supply back on
0 mins
12
Test faucet operation
0 mins
13
Clean up excess sealant
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.