Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 11 · Turn water supply back on

Gradually open the hot and cold water shut-off valves by turning them counter-clockwise. Listen for running water and carefully inspect all connections for any signs of leaks. Tighten fittings slightly if any drips are detected.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 11 · Turn water supply back on

Gradually open the hot and cold water shut-off valves by turning them counter-clockwise. Listen for running water and carefully inspect all connections for any signs of leaks. Tighten fittings slightly if any drips are detected.

Videos for this step

Video 1Video 2Video 3

← Project

Kitchen Faucet Replacement

Step 11 of 13·55 min left

Turn off water supply
0 mins
Disconnect water supply lines
0 mins
Remove faucet mounting nuts
0 mins
Remove old faucet
0 mins
Clean sink surface
0 mins
Prepare new faucet
0 mins
Apply plumber's putty or silicone sealant
0 mins
Install new faucet
0 mins
Tighten faucet mounting nuts
0 mins
Connect new water supply lines
0 mins
11
Turn water supply back on
0 mins
12
Test faucet operation
0 mins
13
Clean up excess sealant
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.