Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 10 · Connect new water supply lines

Connect the appropriate hot and cold water supply lines to the corresponding inlets on the new faucet. Then, connect the other ends of the supply lines to the shut-off valves. Hand-tighten the connections first, then use a wrench to snug them up, being careful not to overtighten.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Connect new water supply lines

Connect the appropriate hot and cold water supply lines to the corresponding inlets on the new faucet. Then, connect the other ends of the supply lines to the shut-off valves. Hand-tighten the connections first, then use a wrench to snug them up, being careful not to overtighten.

Videos for this step

Video 1Video 2Video 3

← Project

Kitchen Faucet Replacement

Step 10 of 13·1.2 hr left

Turn off water supply
0 mins
Disconnect water supply lines
0 mins
Remove faucet mounting nuts
0 mins
Remove old faucet
0 mins
Clean sink surface
0 mins
Prepare new faucet
0 mins
Apply plumber's putty or silicone sealant
0 mins
Install new faucet
0 mins
Tighten faucet mounting nuts
0 mins
10
Connect new water supply lines
0 mins
11
Turn water supply back on
0 mins
12
Test faucet operation
0 mins
13
Clean up excess sealant
0 mins
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.