Skip to main content

Identify Landing Size Requirements — Evaluate Landing Requirements

Beginner4 hours

Part of project

How to Check Your Stairs Against Building Code · Step 10 of 10

Helpful?

In this video

The video addresses the specific requirements for stair landings, both at the top, bottom, and any intermediate points of a staircase. For single-family homes, the minimum landing depth and width are generally 3 feet by 3 feet. However, for public buildings or stairs with an occupancy load greater than 50 people, the minimum width of the landing must match the minimum width of the stairway, which is typically 44 inches. The depth of the landing in these cases must also be at least 44 inches. For staircases with a total vertical rise exceeding 12 feet, an intermediate landing is required to break up the flight, regardless of whether it's residential or public. This is a crucial safety feature to prevent long, uninterrupted falls.

1.4K views55
Transcript
Hide

the 2018 International Building Codebook of what's actually required for or to figure out the width and depth of a landing stair landing. Now, the first thing they point out is that a stair landing is at the top and the bottom of the stairway and that it needs to be the same depth as the width of the stairway. So, this is important. There's only going to be one exception to this rule, and that's when we get to stairways larger than 48 in wide. So, if you have a single family home, which I would imagine the bulk of the people watching this video are looking for information for their for the homes that they live in or maybe something you're remodeling or building. Now, I need to point out that this information isn't going to be accepted all of us all the time by your local building authorities, your building department. So, if you're building something new or remodeling something, always check with them to make sure that what they require because if they change a little bit, then you know, you could be in for a nightmare. And I also need to point out that there are so many rules and regulations in the building codes that some of the people who check the plans don't always check certain things in their mind. They have certain measurements locked in and so they might not be checking it. And these building codes might not have applied to those stairs built in the past, but might apply to the stairs built in the future. So when you go to someone's house and you say, "Wait a minute, this doesn't work here." That's fine. But these building codes from the 2018 International Building Code Book look like they might have changed. So let's go ahead and get started. If you live in a home, single family home or a building with a occupant load of less than 50 people, then uh 36 in by 36 in 3T by 3T at the bottom will be a minimum. The stair width is 36 in wide, 36 in deep. And at the top, you would need the same distance, 3T minimum, 3T in depth. It can be bigger, just can't be smaller. Now, these measurements are going to change if you come to a public building or a building with an occupant load of more than 50. And of course, that means that the width, minimum width on a stairway is going to now change to 44 in or 3T8, bringing the depth of the landing to 3'8 in also. So single family homes is probably not going to apply to you, but this will to practically every other stairway built. So again, 44 in at the at a landing that's in the stairway by 44 in. And of course,…

Auto-generated transcript. May contain errors.