Skip to main content
RR BuildingsRR Buildings
BrowseMy Projects
Log inSign up
RR Buildings

Step 1 · Measure Stair Rise

Using a tape measure, accurately record the vertical distance from the top surface of one tread to the top surface of the adjacent tread. This measurement is known as the stair rise. Repeat this for every step to check for uniformity. Building codes typically require stair rises to be between 4 inches and 7 inches, and all rises within a single flight of stairs should be within 3/8 inch of each other.

Stesso home
SearchSearchBrowseBrowseMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Measure Stair Rise

Using a tape measure, accurately record the vertical distance from the top surface of one tread to the top surface of the adjacent tread. This measurement is known as the stair rise. Repeat this for every step to check for uniformity. Building codes typically require stair rises to be between 4 inches and 7 inches, and all rises within a single flight of stairs should be within 3/8 inch of each other.

Videos for this step

Measure Riser Height and Tread Depth ConsistencyMeasure and Verify Rise and RunRepeat for All Risers and Measure Variation

Tools and Materials

← Project

How to Check Your Stairs Against Building Code

Step 1 of 10·1.8 hr left

1
Measure Stair Rise
15 minutes1 items
2
Measure Stair Run
15 minutes1 items
3
Check for Consistent Riser Height
5 minutes
4
Check for Consistent Tread Depth (Run)
5 minutes
5
Inspect Tread Nosing
10 minutes2 items
6
Check Stair Width
5 minutes1 items
7
Inspect Handrails
15 minutes3 items
8
Inspect Balusters and Guardrails
15 minutes3 items
9
Check Headroom
10 minutes1 items
10
Evaluate Landing Requirements
10 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.