Skip to main content

Check Guardrail Openings — Inspect Balusters and Guardrails

Beginner4 hours

Part of project

How to Check Your Stairs Against Building Code · Step 8 of 10

Helpful?

In this video

Inspect all open spaces within the guardrail panels to ensure safety, particularly for child protection. No open space within a guardrail panel, including areas between pickets, between the wall and the guardrail, and underneath the lowest bar of the guardrail (whether to the floor or the stair), must be large enough to allow a 4-inch (101mm) sphere to pass through. You can use a 4-inch sphere or a tape measure to check these gaps. Visually scan and systematically measure all potential openings to confirm compliance.

4.2K views52
Transcript
Hide

tall the two pictures on the top show the heights of the guardrails being measured the left is on a stair while the right is on a ledge each panel of a guardrail must not have a space large enough for a four inch sphere to pass through measure each open space including the spaces between pickets between the wall and the guardrail and underneath the lowest bar of a guardrail and either the floor or the stair in the bottom three pictures the space is created by the guardrail are being checked the left is showing the space between the lowest bar of the guardrail and the stairway the middle is showing the space between pickets and the right picture shows the space between the wall and the post of a car grill

Auto-generated transcript. May contain errors.