Skip to main content

Measure Baluster Spacing for Code Compliance — Inspect Balusters and Guardrails

Beginner4 hours

Part of project

How to Check Your Stairs Against Building Code · Step 8 of 10

Helpful?

In this video

Visually inspect and, if necessary, use a measuring tape to check the distance between adjacent balusters. The inspector points out that the spacing in the demonstrated railing is greater than 4 inches, which is a common deficiency in older decks. Modern safety standards require that a 4-inch sphere cannot pass through any opening in the guardrail, including between balusters, to prevent a small child from falling through or getting stuck. This non-compliance indicates a need for immediate corrective action, which could involve adding additional balusters or reinforcements.

2.2K views78
Transcript
Hide

space in between the spindles is more than 4 in apart. That's large enough for a small child to fall through the guard. The guard is supposed to prevent you from falling off. But, we know now that this house was built to code back then, but modern standards require the vertical spindles to have smaller spaces in between, so that small kids don't fall out. That's a guard. Prevents you from falling.

Auto-generated transcript. May contain errors.