Skip to main content

Restore Power and Test Switches — Restore power and test operation

Beginner4 hours

Part of project

How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 7 of 7

Helpful?

In this video

Go back to your main electrical panel and flip the circuit breaker (number 17 in this case) back to the 'ON' position to restore power. Return to the installed switches and test them. First, turn the light on using one of the new switches. Then, go to the other three-way switch in the room and turn the light off. Repeat this process to confirm that both switches can independently control the light fixture, demonstrating successful three-way circuit wiring. The demonstration shows the light turning on and off correctly from both switch locations.

846 views28
Transcript
Hide

Now it's time to turn the power back on, circuit breaker number 17. And now to test it, I'll come to the entrance light, which is a dimmer. I'll turn that on. And as you can see, the light goes on and I'm going to walk across the room and this should turn it off as it does. Perfect. Back over to the other side and this should turn it off. And again, that's all the traveler wires communicating to each other.

Auto-generated transcript. May contain errors.