Skip to main content

Connect Wires to Second Switch (Method 2) — Install new 3-way switches

Beginner4 hours

Part of project

How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 4 of 7

Helpful?

In this video

For the second switch box (where power enters), take the black hot wire from the 12/2 incoming power cable and connect it to the black common screw on the switch. Connect the red traveler wire from the 12/3 cable to one of the gold traveler screws. Connect the white wire from the 12/3 cable (which was marked black with electrical tape to signify it as a hot traveler) to the other gold traveler screw. Finally, connect the bare copper ground pigtail to the green ground screw. Ensure all connections are tight and fold the switch and wires neatly into the switch box. Secure the switch to the box using the provided screws.

1.3M views29.1K