Skip to main content

Correct Straight Stringer Layout — Mark the Nosing and Final Cut

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 5 of 6

Helpful?

In this video

This step demonstrates the correct method for laying out a straight stair stringer when incorporating a 1-inch nosing. The stringer's tread cut should be exactly 10 inches deep (to support an 11-inch tread with 1-inch nosing) and the riser height is 7 inches. The treads themselves will be 11 inches long and 3/4 inch thick, with risers also 3/4 inch thick. By laying out the stringer with a 10-inch tread dimension, the 11-inch treads will naturally create the desired 1-inch overhang (nosing) without making the stringer itself too long. This ensures the stair stringer length is accurate for the desired finished stair dimensions.

3.7K views58