Skip to main content

Mark the Stair Stringer for Cutting — Mark the Stair Stringer with a Framing Square

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 4 of 6

Helpful?

In this video

Now that the individual rise (7.5 inches) and run (9.25 inches) are determined, use a framing square to mark the pattern on a 2x12 board. The framing square has markings to quickly set these dimensions. Hold the square with the rise measurement (7.5 inches) on one edge of the 2x12 and the run measurement (9.25 inches) on the other. Use a pencil to draw the lines. Repeat this process for each step, sliding the square down the board. For the first step (which connects to the ground/pad), ensure that the bottom rise is reduced by the thickness of the finished tread material. The video shows marking three steps on the stringer.

98.7K views2.2K