Skip to main content

Trace and Cut Skirt Boards — Cut the Skirt Board

Beginner4 hours

Part of project

How to Scribe and Cut a Stair Skirt Board to Fit · Step 3 of 5

Helpful?

In this video

Carefully place the previously cut paper template onto the ripped MDF board. Ensure the chalk line edge of the template is flush against one edge of the MDF, then tape it down securely. Using a pencil, trace the entire outline of the template onto the MDF. Once traced, use a jigsaw to cut out the skirt board. When cutting, intentionally 'overcut' the skirt board slightly, leaving small gaps, as these will be hidden by the later flooring installation. The video notes to keep the overcuts within an eighth of an inch or so. After cutting, hold a small level vertically against the bottom step of the staircase to mark a vertical line on the skirt board. Use a miter saw to make a clean, straight cut along this vertical line to finish the bottom edge of the skirt board. Off-camera, a file is used to shave off a small amount of material where the skirt board meets the baseboard for a smooth transition.

40.8K views327